Welcome! Log In Create A New Profile Recent Messages


Traditional Walking Beam Sidewheeler

Posted by fredrosse 
Traditional Walking Beam Sidewheeler
February 29, 2012 09:11AM
After many years of planning to build this it is finally a reality. Just a simple steam plant with a slow turning walking beam engine, direct connected to the sidewheels. Have enjoyed many outings this past year, along the Delaware River, various Lakes on the east coast, etc. Some videos on youtube under "Sidewheel Steamboat"

Re: Traditional Walking Beam Sidewheeler
November 08, 2012 02:06AM
You've done a fine job! Did you use the West System (Gougeon) adhesive system for the hull? If so, I hope to see you in their Epoxyworks Mag. They love intersting projects like yours. www.epoxyworks.comthumbs up
Re: Traditional Walking Beam Sidewheeler
April 18, 2014 09:40PM
A short video of the steamer in the workshop, running with about 20 PSI steam pressure will be posted on youtube soon. Look for "Marshall-Bremme Valve Gear" . The operation of the Marshall-Bremme Valve Gear is shown, with the engine initially in short cutoff, loping along at low speed. The gear is then shifted into reverse, full gear, and the engine reverses and accelerates to a higher RPM. Then the valve gear is returned to forward running, full gear, and finally to forward running and short cutoff.

I have a computer model of this valve gear, and there are 9 "link up" notches forward, and 9 notches in reverse, giving cutoff ranging from about 15% to 85% of stroke. The cutoffs on both the head end and crank end of the cylinder are very very close for cutoffs from 30% to 85%.

Re: Traditional Walking Beam Sidewheeler
October 26, 2019 09:30PM
That's a super neat boat. Thanks for sharing!
Sorry, only registered users may post in this forum.

Click here to login

All files from this thread

File Name File Size   Posted by Date  
SW Underway Fred 01.jpg 356.8 KB open | download fredrosse 02/29/2012 Read message
WalkingBeamEngineTiny.jpg 144.5 KB open | download fredrosse 02/29/2012 Read message
DSC03175.JPG 331.9 KB open | download fredrosse 02/29/2012 Read message
MARSHALL BREMME CUTOFFS.jpg 138.3 KB open | download fredrosse 04/18/2014 Read message