Hello - Building my Locomobile Replica
Posted by JPDenver
|
Re: Hello - Building my Locomobile Replica October 06, 2023 06:51AM |
Lika, I have a series 1 lika by Model works this is the company before it became STW. The series 2 has some changes from the series 1. Then in 2012 it was in an accident which bent the frame, at that time I decided to stretch the frame 20" to make it a four seater. Over the years it went thru many changes to improve it drivable. The list is long on the changes.
|
Re: Hello - Building my Locomobile Replica October 10, 2023 06:21PM |
Hello Jim and Rick,
I guess it is about time to update on the progress.
Not much I am afraid. Steam Traction World (STW) is behind in production of kits.
The good news is that they are communicating with us on the status of production,
so I am not worried about my investment. I recently discussed the situation with the GM (Dean) and
he has let me know that backlog is starting to move. But like a lot of other industries and companies,
the last couple of years has been tough.
While waiting I have been involved in some side projects on the Lyka. The electrical system has been revamped
and lighting controls installed. I covered some of this in another thread where I discussed whether I should upgrade
the technology used. I have also investigated some the features of the body side panels, like the use of louvers and trim.
Most of this will be covered in my Blog soon.
In the meantime - Winter is arriving, nights are getting colder, days too.
SO - Here are some pics I took this morning as I pushed the chassis out and cleaned up the work area.
I do not think I will get much more to post until the kits re-appear - I am promised that all the remaining
pieces and parts (incl boiler/burner/and pipes) will be complete around year end. So it will be spring before
I can really dive back into the build as my garage is un-heated.
Thanks for reading -
Jim Pope
Denver, CO
I guess it is about time to update on the progress.
Not much I am afraid. Steam Traction World (STW) is behind in production of kits.
The good news is that they are communicating with us on the status of production,
so I am not worried about my investment. I recently discussed the situation with the GM (Dean) and
he has let me know that backlog is starting to move. But like a lot of other industries and companies,
the last couple of years has been tough.
While waiting I have been involved in some side projects on the Lyka. The electrical system has been revamped
and lighting controls installed. I covered some of this in another thread where I discussed whether I should upgrade
the technology used. I have also investigated some the features of the body side panels, like the use of louvers and trim.
Most of this will be covered in my Blog soon.
In the meantime - Winter is arriving, nights are getting colder, days too.
SO - Here are some pics I took this morning as I pushed the chassis out and cleaned up the work area.
I do not think I will get much more to post until the kits re-appear - I am promised that all the remaining
pieces and parts (incl boiler/burner/and pipes) will be complete around year end. So it will be spring before
I can really dive back into the build as my garage is un-heated.
Thanks for reading -
Jim Pope
Denver, CO
|
Re: Hello - Building my Locomobile Replica October 16, 2023 05:16AM |
The original car had electronics on the dash board it worked but had some problems. I could detail them but since you don't have it it doesn't matter. It looks like on the series 2 they dumbed down the electronics. Now the burner most guys including myself replaced the 220 volt burner, removed the inverter and used a Wayne or Beckett 12 volt DC burner this made the system more reliable. Also the pressure switch that controlled the burner was replaced because of the dead band was to large the new pressure had a adjustable dead band. The diaphragm on the original was a rubber material with micro switch which burnt thru on mine so it was replaced with a commercial industrial type. I stopped by Grier house in North Carolina to look at his car on my way to Florida, since I take it to Florida for the winter we had the opportunity to compare cars and I made some recommendations to his car. We have a Lika Facebook group you may want to join. I need your email address or you can search FB for Likamobile steam car.
That's it for now
Jim Trotta B.S.E.E.
Edited 2 time(s). Last edit at 10/16/2023 05:22AM by jjtjr.
That's it for now
Jim Trotta B.S.E.E.
Edited 2 time(s). Last edit at 10/16/2023 05:22AM by jjtjr.
Sorry, only registered users may post in this forum.
